[Recovery] [Unofficial] Twrp v3 For LG Aristo 2

Image
Prerequisites : YOUR BOOTLOADER MUST BE UNLOCKED Quote: How to unlock the bootloader : 1-enable oem unlock in the developer settings 2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock] note: this will wipe your data] -If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here: http://tool.lime.gdms.lge.com/dn/dow...y=PWZO7A26B9UW How to flash Twrp: BOOT INTO FASTBOOT MODE: With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal ONCE YOU ARE IN FASTBOOT MODE: Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks. Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img  [don't forget to extract the downloaded recovery zip to get the recovery.img] WHEN THE FLASH COMP...
1 comment

[Recovery] Twrp v3 For Lg Stylo 2 Plus



Code: 
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.

Supported Models :
MS550/K550

Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED

Quote:
How to unlock the bootloader :
1-enable oem unlock in the developer settings
2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
note: this will wipe your data]
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/dow...y=PWZO7A26B9UW

How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal

ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]

WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and power it off by taking out the battery and putting it back in.

BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!

Use the hard keys to select "YES" and then "YES" again to boot into TWRP

How to Disable encryption and flash super su [Install Root]:
Quote:
1. In TWRP, go to Wipe > Format Data. Enter the keyword ‘yes‘, in the provided space and enter. This will wipe the automatically encrypted filesystem, and decrypt it.
2. Once the wiping is done, reboot back into recovery. Go to Reboot > Recovery.
3. When the recovery boots again, connect your phone to the PC and Enable MTP under the Mount section.
4. Transfer the downloaded ‘no-verity-opt-encrypt-**.zip’ and ‘SR1-SuperSU-v2.78-SR1-20160915123031.zip to your internal storage or EXTSD
5. Disconnect the device now.
6. Tap on Install. Now, navigate your phone’s storage and select ‘no-verity-opt-encrypt-**.zip’. Finally swipe the ‘Swipe to confirm Flash’ button on the bottom of the screen.
7. The flashing process will merely take a few seconds. And when it’s done, follow the same method to flash the root package – SR1-SuperSU-v2.78-SR1-20160915123031.zip [/B]
Wait 1 or 2 minutes after the zip files are done flashing then reboot system and PROFIT! Your phone may take 3-5 minutes to boot the first time and it might boot-loop once or twice at the Metro PCS splash screen but don’t worry this is expected.


Downloads :
Twrp 3.1.1
https://twrp.me/lg/lgstylo2plus.html

Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.

Credits :
TeamWin, My Testers @!Led*Eyes! @Djoec1983, My family

source: device tree

Please Conider donating if you enjoy my work, Ty
Paypal donation link: https://paypal.me/messi2050

Comments

  1. UnknownAugust 19, 2017 at 6:15 PM

    • BOOT INTO RECOVERY MODE FOR THE FIRST TIME
    HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt screen. You will NEVER release the volume down button in this process!

    Use the hard keys to select "YES" and then "YES" again to boot into

    TWRP !

    this only performed a factory reset and did not boot TWRP and using adb reboot recovery brings me to a screen with an open droid that has the red exclamation point. trying to use volume down+power doesnt do anything here

    ReplyDelete

Post a Comment

Popular posts from this blog

[Recovery] Twrp v3 Lg Aristo [metropc/t-mobile]

Image
Code: *** Disclamer * Your warranty is now void. * * We are not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at us for messing up your device, we will laugh at you. WARNING : The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications! SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip. Prerequisites : • YOUR BOOTLOADER MUST BE UNLOCKED -Check this post for details on how to unlock your lg aristo bootloader http://forum.xda-developers.com/show...7&postcount=15 -If you have problems with the device drivers installed , you will need to install lg bridge app by lg that contains the device driver http://tool...
Keep reading

[Root] Samsung Galaxy J7 SM-J700P [Boost/Virgin Mobile]

Samsung Galaxy J7 SM-J700P [Boost/Virgin Mobile] Root Prerequisites: 1-first you need to unlock your device bootloader , on the phone, go to Settings > About Device then scroll down to find Build number and tap it 7 times to enable Developer Mode 2-next go to Settings > Developer options then set OEM unlocking to on How to Root: Quote: Download CF-Auto-Root from here : HTML Code: https://download.chainfire.eu/822/CF-Root/CF-Auto-Root/CF-Auto-Root-j7ltechn-j7ltezm-smj7008.zip 1) extract the downloaded file on your pc 2) turn off your phone 3) enter download mode by pressing power+volume down + menu buttons then after you enter the download mode press volume up button and connect your phone to the pc 4) open odin press on the [AP] tab choose the cf autoroot file that you already downloaded and extracted [CF-Auto-Root-j7ltechn-j7ltezm-smj7008.tar.md5] 5) Now press start , and after the root file is being flashed successfully ,phone will reboot...
Keep reading

[ROM][7.1.2_r29]UNOFFICIAL LineageOS for Lg Stylo 2 Plus

Image
[ROM][7.1.2_r29]UNOFFICIAL LineageOS for Lg Stylo 2 Plus LineageOS is a free, community built, aftermarket firmware distribution of Android 6, which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway. All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. What's working : RIL (Calls, SMS, Data) Wi-Fi Bluetooth Video Playback Audio Sensors LED GPS FingerPrint...
Keep reading